MARKETPLACC WEBÁRUHÁZ
Porcelain Liquid Soap Dispenser – with Chrome-Effect Pump
User Manual
🧴 Main Features
- Elegant white porcelain liquid soap dispenser.
- Clean cylindrical design that easily complements different bathroom environments.
- Chrome-effect pump dispenser with a long spout.
- Embossed “SOAP” lettering on the front of the container.
- Liquid soap can be dispensed by pressing the pump head.
- The pump is removable, making the container easy to refill.
- Suitable for placement on a bathroom countertop, next to a washbasin, or on another surface used for hand washing.
- The compact design allows the dispenser to be used independently without a separate soap dish.
⚙ How to Use
- Place the dispenser on a stable, level and clean surface.
- Before refilling, make sure that the pump can be removed properly.
- Remove the pump from the container.
- Fill the container with liquid soap. Do not overfill the container.
- Replace and secure the pump properly.
- Before first use, press the pump head several times to allow the liquid to reach the spout.
- Place your hand underneath the spout when dispensing soap.
- Press the pump head down with an even motion and then release it.
- Use the dispensed amount of liquid soap as required.
⚠ Important Safety Information
- Use the product only for dispensing liquid soap.
- Do not overfill the container.
- Before use, make sure that the pump is properly secured.
- Do not apply excessive force when removing or replacing the pump.
- Do not drop the dispenser or expose it to strong impacts, as the porcelain may crack or break.
- Do not use the product if the porcelain container is cracked, broken or has sharp damaged edges.
- Do not use the dispenser if the pump is damaged or leaking.
- Use the product on a stable, level surface where it cannot easily tip over.
- Keep out of the reach of children and do not allow the product to be used as a toy.
- Do not use aggressive, corrosive or abrasive cleaning products on the porcelain or pump.
🧼 Cleaning and Maintenance
- Clean the outside of the porcelain container with a soft, slightly damp cloth.
- Wipe the surface dry after cleaning.
- Clean the chrome-effect pump with a soft, damp cloth and then wipe it dry.
- Do not use abrasive cleaners, scouring pads or aggressive chemicals.
- If soap residue accumulates around the pump spout, carefully wipe it away.
- When refilling the container, check that the pump and container connection are properly sealed.
- If the dispenser will not be used for an extended period, it is recommended to empty and clean the container.
- Store the product in a clean, dry and stable place.
ℹ Product Specifications
| Property |
Value |
| Product type |
Liquid soap dispenser |
| Material |
Porcelain |
| Color |
White |
| Pump |
Chrome-effect |
| Design |
Cylindrical |
| Front lettering |
Embossed “SOAP” |
| Diameter |
Approx. 9 cm |
| Container height |
Approx. 13 cm |
| Total height with pump |
Approx. 19 cm |
| Use |
For dispensing liquid soap |
| Refilling |
Through the removable pump |
💡 Useful Tips
Place the dispenser close to the washbasin so that the liquid soap is easily accessible before and after washing your hands.
During the first use, the pump may need to be pressed several times before soap reaches the spout. This is normal, as air must first be expelled from the pump tube.
To maintain the appearance of the chrome-effect pump, it is recommended to wipe away water and soap residue after use.
When refilling the container, do not fill it completely to the top. This reduces the risk of liquid spilling or overflowing when the pump is replaced.
🔧 Common Problems and Solutions
| Problem |
Possible Cause |
Solution |
| The pump does not dispense liquid |
The pump has not yet drawn up the liquid |
During first use, press the pump several times until liquid appears at the spout. |
| The pump is difficult to press |
The pump or spout is contaminated with soap residue |
Carefully clean the external parts of the pump and the spout with a soft, damp cloth. |
| The pump does not dispense evenly |
Air has entered the pump system or the container contains too little liquid |
Press the pump several times and check the liquid level in the container. |
| Liquid leaks around the pump |
The pump is not properly fitted or secured |
Remove the pump and reinstall it correctly. Check the connection. |
| The pump does not stay securely in place |
The pump has not been fitted correctly |
Check the pump alignment and secure it carefully. Do not force it. |
| The porcelain container is damaged |
Dropping or strong impact |
Do not continue using a damaged, cracked or broken porcelain container. |
| The pump or container surface is dirty |
Soap or water residue |
Wipe with a soft, slightly damp cloth and then wipe dry. |