MARKETPLACC WEBÁRUHÁZ

Rechargeable Electric Foot File – with 2 Interchangeable Roller Heads

User Manual

📑 Table of Contents

Main Features
How to Use
Important Safety Information
Cleaning and Maintenance
Product Specifications
Helpful Tips
Common Problems and Solutions

🦶 Main Features

Rechargeable electric foot file designed for home foot care.
Cordless operation powered by a built-in rechargeable battery.
White housing with rose-gold details.
Two interchangeable roller heads: fine and coarse surfaces.
The fine roller head is suitable for gentler care, while the coarse roller head can be used for drier and more heavily thickened areas of skin.
Two speed settings are available.
A built-in LED light is located below the roller head to illuminate the area being treated during use.
The roller head can be removed by pressing the release button located on the top of the device.
A transparent, removable protective cap helps protect the roller head when the device is not in use.
The device can be charged using the supplied USB charging cable.

⚙ How to Use

Before first use, charge the built-in battery using the supplied USB charging cable.
After charging, select the roller head appropriate for the intended use.
Switch off the device before changing the roller head.
Press the roller-head release button located on the top of the device.
Once released, carefully remove the roller head from the device.
Insert the desired fine or coarse roller head and make sure it is properly secured.
Remove the transparent protective cap before use.
Use the switch on the back of the device to select the desired speed setting.
Place the rotating roller gently against the clean, dry area of skin to be treated.
Move the device across dry, thickened skin using light and even movements.
Do not hold the device in one place for an extended period and do not apply excessive pressure.
Switch off the device after use.
If necessary, clean the roller head and replace the transparent protective cap.

⚠ Important Safety Information

The device is intended only for the cosmetic care of dry, thickened skin.
Do not use on damaged, bleeding, inflamed, irritated or infected skin.
Do not use on moles, warts or other skin lesions.
Do not apply excessive pressure or keep the rotating roller on the same area for an extended period.
Avoid excessive or prolonged treatment.
Use the device only for its intended purpose.
Before use, make sure that the roller head is properly secured.
Always switch off the device before changing the roller head.
Do not touch the rotating roller with your fingers or attempt to stop it by hand.
Do not use the device or charging cable if either is damaged.
Do not use the device while it is charging.
Do not immerse the device in water or rinse it under running water.
Keep the device out of the reach of children.
The device is not a toy and is not intended for use by children.
If you experience pain, severe irritation or bleeding during use, stop using the device immediately.

🧼 Cleaning and Maintenance

Always switch off the device before cleaning.
If necessary, remove the roller head by pressing the release button on the top of the device.
Remove skin particles from the roller head using a soft, dry brush or cloth.
Clean the outer surface of the device with a soft, dry or slightly damp cloth.
Do not immerse the device or charging connector in water.
Do not use aggressive chemicals, corrosive cleaning agents or abrasive materials.
Regularly inspect the roller heads for wear, damage or deformation.
Do not use a damaged or significantly worn roller head.
After cleaning and drying, reinstall the roller head or store it in a clean, dry place.
Replace the transparent protective cap when the device is not in use.
Store the device in a dry, clean place away from direct sunlight and extreme temperatures.

ℹ Product Specifications

Property	Value
Product type	Rechargeable electric foot file
Color	White with rose-gold details
Material	Plastic and abrasive surface
Quantity	1 device
Roller heads	2 interchangeable roller heads
Roller head types	Fine and coarse surfaces
Power supply	Built-in rechargeable battery
Charging	Via USB cable
Included accessory	USB charging cable
Protective cap	Transparent, removable
LED light	Built-in, for illuminating the treatment area
Speed settings	2 settings
Roller head release	Push button located on the top of the device
Height	Approx. 19 cm
Width	Approx. 3.5 cm
Intended use	Care of dry, thickened skin on the heels and soles of the feet

💡 Helpful Tips

The fine roller head may be suitable for mild dryness and regular, gentler care, while the coarse roller head can be used for drier and more heavily thickened areas of skin.

It is recommended to start at the lower speed setting and switch to the higher setting if necessary.

Guide the roller gently across the skin. Applying excessive pressure does not make the treatment more effective and may increase the risk of skin irritation.

The built-in LED light can help illuminate the treatment area, particularly around areas of the heel and sole that are more difficult to see.

Clean the device after use and store it with the protective cap in a dry place.

🔧 Common Problems and Solutions

Problem	Possible Cause	Solution
The device does not turn on	The battery is discharged or the switch is not in the correct position	Charge the device using the supplied USB cable and check the switch on the back of the device.
The roller head does not rotate properly	The roller head is not installed correctly or foreign material has entered the rotating section	Switch off the device, remove the roller head by pressing the release button on the top, inspect it and reinstall it correctly.
The roller head cannot be removed	The release button has not been pressed correctly	Switch off the device, fully press the release button on the top of the device and carefully remove the roller head.
The device stops during use	Low battery level or excessive load	Switch off the device, allow it to rest briefly and recharge it if necessary.
The LED light does not illuminate	The device is not switched on or a malfunction has occurred	Check the switch and battery charge level. If the LED still does not work, stop using the device and check for visible damage.
The roller presses too strongly against the skin	Excessive pressure is being applied during use	Reduce the pressure and guide the device over the skin using light, even movements.
The device does not charge	The charging cable is not connected correctly or the cable is damaged	Check the connections and condition of the cable. Do not use a damaged cable.
The roller surface is dirty	Skin particles have accumulated on the roller during use	Switch off the device, remove the roller head and clean it according to the cleaning and maintenance instructions.