MARKETPLACC WEBSTORE

🚿 Main Features

• Modern turbo shower head design.
• Built-in turbine for a characteristic rotating water flow.
• 360° rotatable shower head for easy adjustment of the water direction.
• STOP button on the handle for convenient interruption of the water flow.
• The lower part of the handle features a transparent filter cartridge housing.
• The package includes 1 filter cartridge.
• The shower head features a blue propeller.
• Material: ABS.
• Overall dimensions: approximately 26.5 × 8 cm.
• Disassemblable design for access to the filter and internal components.

⚙ How to Use

1. Before installation, check the condition of the shower head, connection and filter cartridge.
2. Connect the shower head properly to the shower hose and make sure the connection is secure.
3. Turn on the water and check that water flows properly through the shower head.
4. When holding the shower head in your hand, adjust the head to the desired position. The head can be rotated 360°.
5. To conveniently interrupt the water flow, press the STOP button located on the handle.
6. To resume the water flow, use the STOP button again.
7. After use, turn off the shower tap.

Important: The STOP button is intended for convenient control of the water flow through the shower head. Always turn off the shower tap completely when you have finished showering.

🔍 Pre-Use Inspection

Before each use, check the condition of the shower head and filter cartridge, paying particular attention to the following:

• there are no visible cracks or other damage to the shower head;
• the shower connection is in good condition;
• the connections are securely attached;
• the transparent filter cartridge housing closes properly;
• the filter cartridge is correctly positioned inside the handle;
• there are no signs of water leakage;
• water flows properly through the shower head.

If you notice damage, leakage or abnormal operation, do not use the product until the problem has been resolved.

🧼 Cleaning, Storage and Maintenance

• Regular cleaning helps maintain proper operation of the shower head.
• Clean the exterior surfaces with a soft, slightly damp cloth.
• The transparent filter cartridge housing can occasionally be disassembled to inspect and clean the internal components.
• Inspect the filter cartridge and clean or replace it when necessary.
• Turn off the water supply before cleaning or handling the filter cartridge.
• When reassembling the shower head, make sure that all components are correctly positioned and that the housing is properly closed.
• When not in use, store the product in a clean and dry place.

Important: Do not use cleaning methods or cleaning agents that may damage the ABS plastic surface.

ℹ️ Product Information and Compliance

📌 Important Information About Use

The turbo shower head combines a built-in turbine, a filter cartridge integrated into the handle, a STOP button and a 360° rotatable head to provide practical features for everyday showering.

The filter cartridge is located inside the transparent part of the handle, allowing its condition to be checked from the outside. Regular inspection and, when necessary, cleaning or replacement may help maintain proper water flow.

The economical design is intended to support reduced water consumption during showering. Actual water consumption depends on water pressure, the water supply system and the conditions of use.

The product must not be used with instantaneous (tankless) or thermostatic water heaters.

❓ Frequently Asked Questions

⚠️ Safety Reminder

Use the shower head only as intended and check the condition of the product, connections and filter cartridge before each use.

The product must not be used with instantaneous (tankless) or thermostatic water heaters. Do not use a damaged or leaking shower head.