MARKETPLACC WEBSHOP

LED Flying Toy with Launcher – Blue Light

User Manual

Main Features
How to Use
Important Safety Information
Cleaning and Maintenance
Product Details
Helpful Tips
Troubleshooting

Main Features

LED flying toy designed for use with the included launcher.
The flying toy has a rotor made of thin, lightweight PET film.
The rotor design helps the toy spin and descend slowly.
The toy features one blue LED light that can be switched on and off.
The toy operates with a built-in battery, which is included with the product.
The rotor blades must be bent into the correct shape before first use.
Designed for outdoor use and active play.
The package contains 1 LED flying toy with launcher.

How to Use

Before use, check that the toy and launcher are undamaged.
Before first use, carefully bend the rotor blades into the correct shape. Do not bend them excessively or crease the PET film.
Check that the flying toy fits properly into the launcher.
Use the toy in an open outdoor area free from obstacles.
Hold the launcher as intended and use its launching mechanism to send the flying toy into the air.
After launch, watch the toy as it spins and descends. The rotor helps it descend slowly.
Use the switch on the product to turn the blue LED light on or off.
After use, collect all parts of the toy and store them in a dry, safe place.

Important Safety Information

Use the toy only in an open, safe area where its flight is not obstructed by trees, wires, buildings, or other objects.
Do not aim or launch the toy toward people, animals, vehicles, or fragile objects.
Never launch the toy toward anyone's face, eyes, or head.
Do not modify, cut, or alter the launcher or flying toy.
The PET film rotor is made of thin material. Do not pull, tear, or crease it when bending.
Do not use the toy if the rotor, launcher, or any other part is cracked, broken, or deformed.
The toy may contain small parts. Keep it away from young children. Young children should use it only under adult supervision.
Do not use the toy on roads, cycle paths, or in busy areas.
Do not use the toy during storms, in strong winds, or in weather conditions that may cause uncontrolled flight.
Do not attempt to disassemble, remove, or replace the built-in battery.
Do not throw the product into a fire or expose it to extreme heat.

Cleaning and Maintenance

If necessary, clean the outer surface of the toy with a soft, dry, or slightly damp cloth.
Allow the product to dry completely after cleaning.
Do not immerse it in water or use aggressive chemicals, solvents, or abrasive cleaners.
Handle the PET film rotor blades carefully, as the thin material can be easily deformed.
Before storage, check that the rotor blades are not creased and that the launcher is undamaged.
Store the toy in a dry place, away from direct sunlight and heat sources.
If the LED does not work or the product appears damaged, do not attempt to disassemble it. Stop using the toy.

Product Details

Property	Value
Product Name	LED Flying Toy with Launcher – Blue Light
Product Type	LED Flying Toy with Launcher
Model	WW-60132
Package Quantity	1 pc
Lighting	1 blue LED
LED Operation	Can be switched on and off
Rotor Material	Thin PET film
Rotor Function	Spinning, slow descent
Power Supply	Built-in battery
Operation	Flying toy operated with a launcher
Before First Use	The rotor blades must be bent into shape

Helpful Tips

Before first use, carefully bend the rotor blades into the correct shape. Properly shaped rotor blades help the flying toy spin and descend slowly.

For best results, use the toy outdoors in calm weather and in an open area. This makes the flight easier to follow and reduces the chance of the toy hitting an obstacle or landing in an inaccessible place.

The blue LED light may be more noticeable in low-light conditions. Even then, use the toy only in a clearly visible and safe area.

The toy operates with a built-in battery, so no separate battery needs to be inserted before use.

Troubleshooting

Problem	Possible Cause	Solution
The flying toy does not spin properly	The rotor blades are not shaped correctly or have become deformed	Check the shape of the rotor blades before use. Carefully adjust them, but do not crease or bend the film excessively.
The toy does not launch properly	The launcher or flying toy is not fitted correctly	Check the fit and the way the launcher is used. Do not force the toy if any part is damaged.
The flying toy descends too quickly or irregularly	The rotor blades are incorrectly shaped, or the wind is too strong	Check the shape of the rotor blades and try using the toy in calm weather in an open area.
The blue LED does not light up	The LED is switched off, the built-in battery is depleted, or the product has malfunctioned	Check the LED switch. Do not disassemble the product or attempt to replace the built-in battery.
The rotor is creased or damaged	Incorrect bending or mechanical impact	Stop using the toy with a damaged rotor. Do not attempt to repair it with glue or by cutting it.
The launcher does not work properly	The launcher is damaged, or the flying toy is not fitted correctly	Check the condition of the parts. Do not use a damaged or deformed launcher.