MarketPlacc

MARKETPLACC WEBÁRUHÁZ

Shower Curtain 180 × 200 cm – with Plastic Hanging Hooks

User Manual

📑 Table of Contents

  1. Main Features
  2. How to Use
  3. Important Safety Information
  4. Cleaning and Maintenance
  5. Product Specifications
  6. Useful Tips
  7. Common Problems and Solutions

🚿 Main Features

⚙ How to Use

  1. Make sure that the shower curtain rod is securely and properly installed.
  2. Remove the shower curtain and the included plastic hanging hooks from the packaging.
  3. Place the hanging hooks onto the shower curtain rod.
  4. Attach the upper part of the shower curtain to the hooks.
  5. Check that the curtain is properly attached at all hanging points.
  6. Pull the curtain across so that it adequately covers the shower opening.
  7. After showering, spread the curtain out to allow proper ventilation and drying.
  8. If necessary, remove the curtain from the hooks for cleaning.

⚠ Important Safety Information

🧼 Cleaning and Maintenance

ℹ Product Specifications

Property Value
Product type Shower curtain
Product name Shower Curtain 180 × 200 cm – with Plastic Hanging Hooks
Colour White
Size 180 × 200 cm
Material 95% polyethylene, 5% EVA
Hanging hooks Plastic hanging hooks
Included accessory Plastic hanging hooks
Cleaning With lukewarm water and mild detergent
Drying Allow to dry completely after cleaning
Manufacturer Pepco
SKU 61791701
Style 617917
Barcode 2200161791764

💡 Useful Tips

After showering, it is recommended to leave the curtain fully spread out so that air can circulate around the surface more easily and help it dry.

Regular, gentle cleaning can help maintain the shower curtain in good condition. According to the manufacturer's instructions, lukewarm water and a mild detergent should be used for cleaning.

Correct positioning of the curtain is important for everyday use. Position it so that as much of the water as possible remains within the shower area during use.

The included plastic hanging hooks make it easy to move the curtain and remove it from the shower curtain rod when necessary.

🔧 Common Problems and Solutions

Problem Possible Cause Solution
The curtain is difficult to move. The hanging hooks are not positioned correctly on the rod. Check the position of the hooks and then move the curtain gently.
Part of the curtain slips off the rod. One of the hanging hooks is not properly attached. Check the affected hook and attach it correctly.
Water gets onto the bathroom floor. The curtain is not positioned correctly, or water is escaping around the curtain. Position the curtain so that it adequately covers the shower opening.
The curtain dries slowly. The curtain has been left gathered, or the room does not have sufficient ventilation. Spread the curtain out fully and ensure adequate ventilation.
The curtain is dirty. Water, soap or other residue may accumulate on the surface during use. Clean with lukewarm water and a mild detergent, then allow it to dry completely.
A hanging hook is broken. Mechanical damage or excessive load. Do not continue using the damaged hook. Replace it with a suitable hanging hook.
The upper part of the curtain is damaged. Excessive pulling, jerking or load. Do not continue using the curtain in a damaged condition and replace the product if necessary.